Click Images To Enlarge
2 X 4 MultiSwitch (Converts 18-Inch Dual to an 18-Inch Quad) - $14.99
The MS2X4WB multiswitch is small enough to fit in the palm of your hand but BIG enough to power up to 4 satellite receivers. Powered by the satellite receivers, an external power source isn't necessary. Compatible with all 18-inch round satellite dish antennas with dual LNB's. Weather seals for outside installations are included. DIRECTV™ approved.

MICRO 3 X 4 Digital Satellite MultiSwitch & Combiner $19.99
A multiswitch small enough to fit in the palm of your hand but BIG enough to power up to 4 satellite receivers. Ultra-compact size makes working within an enclosure a snap! Powered by satellite receivers. No external power source needed. Compatible with all 18-inch round satellite dish antennas with dual lnb's.  DIRECTV™ approved. schematic

3X8 Digital Satellite MultiSwitch $29.99
These high performance multi-switches from are designed to provide excellent connectivity with today’s satellite systems and emerging technologies. They are suitable for use with the DirecTV 18-inch round satellite dish antenna equipped with a dual-port LNBF.  Local signals are easily combined within the multi-switch, eliminating duplicate cable runs. The heavy-duty, weatherproof case allows the multi-switch to be mounted virtually anywhere, indoors or out. schematic

4X4 Multi-Satellite Multi-Switch & Combiner $39.99
This multiswitch is designed to intercept regular programming signals from the 101° DirecTV satellite and seamlessly combine those signals with local channels transmitted from the 72.5° satellite OR intercept regular programming signals from the 101° DirecTV satellite and seamlessly combine those signals with ethnic programming on the 95° satellite. Operate up to 4 receivers. At this time, only the DIRECTV D10, D11 and later model receivers come pre-loaded with the software needed to receive programming from two or more dishes. Earlier receivers will not work with this switch.

Wide-Band 6X8 Multi-Switch $79.99
The WB68 is a DirecTV approved 6X8 multi-switch designed to expand both the first generation AT-9 and the second generation AU-9 Satellite Dish Antennas from 4 ports out to 8 ports out, supporting up to 8 independently operating receivers. The WB68 supports all DirecTV Receivers, but is specially designed to work with the newest MPEG4-capable DirecTV High-Definition Receivers.. We highly suggest you click here or on the picture to learn more about this switch before purchasing. schematic

DIRECTV® SWM8 Single-Wire Multi-Switch with Power Supply $199.99
For use with a 5LNB (AT9 or AU9) DIRECTV dish. Allows two-signals to travel down a single coaxial cable to feed the DirecTV DVR. Necessary equipment in homes where running a second coaxial drop is not an option. Specially designed splitters can be used in conjunction with the SWM8 to feed up to 8 satellite tuners (a DVR has two tuners in a single housing). Need info on SWM (Single Wire Technology? - Click Here

DIRECTV® B Band Converter (BBC Module / SUP-2400) - $19.99
The B Band Converter (BBC) module is installed on the A3/MPEG-4 capable satellite receiver. It connects to the Satellite In coaxial jack on the back of the receiver. The other end connects to the Ka/Ku satellite dish (DirecTV AT9/Slim-Line Dish). This converter up-converts the signal from the dish in the Ka-band (250-750 MHz) non-useable signal into a 950-2150 MHz useable signal for the satellite receiver.

DISH NETWORK SW-21 Multi-Dish SWITCH $21.99
The SW21 Multi-Dish Switch combines signals from any two Dish Network Satellites (61.5°, 110°, 119°). Also, can be used in conjunction with a "Legacy" Twin LNBF and a "Legacy" dual LNBF to capture signals from ALL THREE SATELLITES. 1/2" Precision Machined F-Connector Threads. Epoxy-Sealed Back-Cover Anti-Corrosion Chromate Zinc-Alloy Die-Cast Housing. Schematic Here

DISH Pro Plus Separator for Dish Network Installations $9.99
The DISH Pro Plus Separator is to be used in conjunction with a DISH Pro Plus switch or DISH Pro Plus LNBF to connect the two satellite tuner inputs of a DISH Pro Plus-compatible dual- tuner receiver using one cable. Click on the picture for more information concerning this item.  Schematic Here.

Dish Network DP34 VideoPath® Multi-Dish Switch $119.99
With the introduction of DishPro technology this switch replaced the SW64 switch. It employs 22 KHz tone bursts whereas the earlier SW64 switch relied on DC voltage. This switch is capable of capturing signals from three of Dish Network's orbital slots and feeding those signals to four individual tuners but it can also be cascaded with other DP34 switches and feed up to 12 individual tuners.  More info on DP34 Switches here.

Dish Network DPP44 VideoPath® Multi-Dish Switch $199.99
The DISH Pro Plus 44 Switch features DISH Pro Plus Technology, LNBF inputs supporting four orbital locations, four receiver outputs, trunkable ports to connect additional switches, and a power inserter.  Four inputs for use with up to four orbital locations.  Four outputs for connection to up to four tuner inputs.  Four "trunk" connections, to "trunk" to another DP Plus 44 Switch.  DOES require power insertion (Included with purchase).  Can be used indoors or outdoors.  More info on DPP44 Switches here.

Need more info?
If so, click on the "Get Info" button where you'll find links to several hundred pdf files containing product information, schematics and detailed instructions on practically everything we offer for sale.  That page also contains a "Dish Pointer" widget.  Type in your street address  - choose your satellite - and get azimuth, elevation and skew.