- DISH 1000 allows you to receive programming from three orbital locations; 110°, 119°, and 129° using a dish antenna size similar to the DISH 500.
-
The 1000.2 LNBF assembly supports connection of up to three satellite receivers in any of the following combinations:
-
Single-cable connection to DISH Pro Plus (dual-tuner) receivers, when each input is used with a DISH Pro Plus Separator.
-
Single-cable connection to DISH Pro receivers.
-
Single-cable connection to a Legacy receiver provided that a DISH Pro or DISH Pro Plus receiver is also connected and powered at all times. No DISH Pro Adapter is required.
-
-
While all DISH Network satellite receivers can be connected to the DISH 1000.2, the following models may not detect and will not support the 129°W location: 1000, 2000, 3000, 4000, 5000, JVC-DVHS (IRR), and the DishPlayer 7100/7200.
-
This installation supports Legacy receivers, but there must be at least one DISH Pro or DISH Pro Plus receiver in the installation. Legacy receivers are receivers which do not have the DISH Pro or DISH Pro Plus logo.
-
Dimensions Dish Face: 18"H x 23"W - Mounting Mast: Standard 1 5/8"
