|
|
|
 |
Please visit |
|
|
|
|
Please visit |
 |
|
18-INCH DIGITAL SATELLITE DISH ANTENNA
$49.99 Dish: 18 inches - Dual sided galvanized steel - Unique aluminum powder-coat weather-protection - Standard grey color. Manufactured for use with DirecTV® standard satellite receivers but will also accept signals from any ONE of the Dish Network® satellites in the 61.5°, 101°, 110° or 119° orbital slots. Brand-new in-the-box kit includes 18-inch dish, dual-feed LNBF, house mounting bracket, and hardware pack. |
|
24-INCH DIGITAL SATELLITE DISH ANTENNA
$79.99 Dish: 24 inches - Dual sided galvanized steel - Unique aluminum powder-coat weather-protection - Standard grey color. LARGER SIZE DISH REFLECTIVE SURFACE INCREASES SIGNAL STRENGTH and REDUCES RAIN FADE. Designed to intercept digital signals from any ONE of the DirecTV® or Dish Network® satellites (61.5°, 101°, 110° or 119° orbital slots). Brand-new in-the-box kit includes 24-inch dish, dual-feed LNBF, house mounting bracket, and hardware pack. |
|
30-INCH DIGITAL SATELLITE DISH ANTENNA
$119.99 Dish: 30 inches - Dual sided galvanized steel - Unique aluminum powder-coat weather-protection - Standard grey color. LARGER SIZE DISH REFLECTIVE SURFACE INCREASES SIGNAL STRENGTH and REDUCES RAIN FADE. RECOMMENDED FOR EXTREME FRINGE AREA WHERE SATELLITE ELEVATION IS LOW ON THE HORIZON AND SIGNAL IS CONSTANTLY DIGITIZING. Designed to intercept digital signals from any ONE of the DirecTV® or Dish Network® satellites (61.5°, 101°, 110° or 119° orbital slots). Brand-new in-the-box kit includes 30-inch dish, dual-feed LNBF, house mounting bracket, and hardware pack. |
|
30-INCH (76 CM) & 36-INCH
(90 CM) SATELLITE
DISH ANTENNAS WITH
UNIVERSAL LNBF
MOUNT These dishes, featured on our free-to-air satellite page are primarily designed for use with Free-to-Air Ku Satellite Systems but can be readily adapted for use with digital satellite programming services offered by DirecTV® and Dish Network® by simply installing a circular-polarized LNBF. |
|
|
DirecTV MULTI-SATELLITE DISH ANTENNA (PHASE III) $89.99 The DirecTV Phase III Multi-Satellite Dish Antenna accesses and intercepts digital signals from THREE DirecTV satellites: 101º, 110º, and 119º -- simultaneously. Built in weather-proof multi-switch supports up to 4 satellite receivers without the need for additional wiring, reducing the cost of parts and labor associated with typical installations. Smaller size (18" X 21") than the Phase II ParaTodas dish (18" X 24") improves appearance. Necessary equipment for some DirecTV ethnic language programming and also for local channels in certain areas. |
|
DirecTV SlimLine KaKu
Satellite Dish Antenna The DirecTV AU9 SlimLine Multi-Satellite Dish Antenna is necessary equipment for accessing DirecTV's full-array of high-definition television programming. The 5-Head LNBF is capable of receiving signals from 5 orbital slots. The standard quad-feed LNBF is capable of operating up to 4 DirecTV tuners and can be expanded to accommodate even more by adding a multi-switch. The standard SlimLine LNBF can easily be converted to single-wire technology by inserting a SWM multi-switch - or - single-wire technology can be achieved by replacing the standard Quad-LNBF with a SWM LNBF. Please click on the SWM Button for more information concerning this dish. |
|
|
DISH NETWORK: DISH 500 WITH DISH-PRO PLUS TWIN LNBF $119.99 Dish Network DISH 500 SATELLITE ANTENNA WITH DISH-PRO PLUS TWIN LNBF supports one or two Dish Network satellite receivers. SW-21 switches are enclosed in the lnb housing ~ weatherproof. COMPLETE DISH ASSEMBLY including mounting arm, twin lnb and hardware pack. Use to capture signals from both Dish Network satellites (119º and 110º) OR use it to capture signals from both Bell ExpressVu satellites (92º and 81º). |
|
DISH NETWORK DISH 1000 SATELLITE DISH ASSEMBLY $129.99 The DISH 1000 allows you to receive programming from three orbital locations; 110°, 119°, and 129° using a dish antenna similar in size to the DISH 500. Dimensions of the dish face is 18"H x 23"W. Uses a standard 1 5/8" Mounting Mast. The DISH 1000 includes a DP Plus Triple LNBF - no switch needed for one, two or three receivers. Click here to open a new window for additional information. |
|
DUAL LNBF for
SQUARE-Tube Satellite Dish Antennas
$29.99 This dual-feed LNB is designed for use with Rectangular-Tube Satellite Dish Antennas but will also work with D-Tube dishes such as the Dish 300. Works well with any digital satellite service: DirecTV or Dish Network. Circular Polarized - Polarity Switched by Receiver Voltage (13VDC-18VDC). Ideal for use with the DirecTV 18-Inch Satellite Dish Antenna but will also work with the larger 24", 30" and 36" dishes. OEM - NOT A CHEAP AFTER-MARKET ITEM! |
|
DirecTV MULTI-SATELLITE (PHASE III)
LNBF $49.99 This quad-feed LNBF is designed for use with the DirecTV Phase III (TripleSat) Dish Antenna. Gathers signals from three DirecTV satellites (101°, 110° and 119°) - combines those signals in an internal multi-switch and feeds up to four DirecTV tuners. An external multi-switch can be added to feed even more tuners. OEM - NOT A CHEAP AFTER-MARKET ITEM! |
|
DishPRO® TWIN LNBF -
DishPRO Technology (22 KHz)
$69.99 ORIGINAL EchoStar® EQUIPMENT ~ NOT AN AFTERMARKET PRODUCT! Designed to be used with the DISH 500® Antenna. Captures signals from both the 110° and 119° satellites. Switches are built-in and weather-proof. Supports ONE or TWO DISH Network satellite receivers. Click on picture for more details. |
|
DishPRO® PLUS TWIN LNBF Designed to be used with the DISH 500® Antenna. The "plus" port is used to collect and combine signals from a separate satellite dish antenna aimed at either the 61.5º OR 148º satellite (Round 18-inch dish equipped with a DISH-PRO LNBF is required). Before ordering this product, we highly suggest you download the user guide and familiarize yourself with its contents to determine if your satellite receivers are supported and your intended application is feasible. Click here to get price and details. |
 |
|
DishPRO® QUAD LNBF
-
DishPRO Technology (22 KHz)
$99.99 ORIGINAL EchoStar® EQUIPMENT ~ NOT AN AFTERMARKET PRODUCT! Designed to be used with the DISH 500® Antenna. Captures signals from both the 110° and 119° satellites. Switches are built-in and weather-proof. Supports ONE, TWO, THREE, OR FOUR DISH Network satellite receivers. Click on picture for more details. |
|
Dish 500 Yoke Adaptor
-
$9.99 Hard-plastic yoke designed to be used with the DISH 500® Antenna. Will accept any one of the three DishPRO LNBFs featured above (DishPRO Twin, DishPRO PLUS Twin or DishPRO Quad). Will also accept two of the DishPRO Dual LNBFs featured below. Also compatible with Dish Legacy LNBFs. ORIGINAL EchoStar® EQUIPMENT ~ NOT A CHEAP AFTERMARKET PRODUCT! |
|
DISH 300 (18-Inch / 46 CM) SATELLITE DISH ANTENNA
with DishPRO Dual LNBF Designed to be used with the DISH PRO PLUS TWIN LNBF above to capture signals from a THIRD Dish Network satellite. Aims at either the 61.5º OR 148º satellites and connects to the "plus" port of the Dish PRO PLUS Twin LNBF. Before ordering this product, we highly suggest you download the user guide and familiarize yourself with its contents to determine if your satellite receivers are supported and your intended application is feasible. Click here to get price and details. |
|
|
Dish 500
I
Adaptor -
$9.99 Hard-plastic adaptor designed to be used with the DISH 500® Antenna. Converts the rectangular tube into a D tube so that it can accept the DishPRO Dual LNBF featured in the kit above or the stand-alone product below. Simply remove the Yoke Adaptor on the Dish 500 and replace it with this I Adaptor. ORIGINAL EchoStar® EQUIPMENT ~ NOT A CHEAP AFTERMARKET PRODUCT! |
|
DishPRO® Dual LNBF This item is designed to be used with a SECOND DISH, alongside a DISH 500® Antenna equipped with a DishPRO PLUS LNBF. Use this item on a SECOND DISH to capture signals from a THIRD Dish Network SATELLITE such as the 61.5° or 148° satellite and feed those signals into the plus port on the DishPRO Plus LNBF. Before ordering this product, we highly suggest you download the user guide and familiarize yourself with its contents to determine if your satellite receivers are supported and your intended application is feasible - click on the Get Info button to go there! |
|
|
DirecTV SAT C CONVERSION KIT $34.99 Add the third LNB to your DirecTV Phase II (ParaTodas) satellite dish antenna to capture signals from the 110° DirecTV satellite. Kit includes everything you need: C-LNB, Combiner, Screws and Jumper Cable. |
